Description
Transducerinn er með afar hratt 100 µs svörunarhlutfall frá 0% til 90% af fullum mælikvarða og næmi niður í um 5 mbar (um 0,07 psi). Þetta gefur nákvæma framsetningu á merki sem breytast hratt sem spanna breitt þrýstingssvið eins og strokkaþjöppun á meðan vélin er í gangi, jafnvel meðan á inngjöf stendur.
Einnig fylgir einstök aðdráttaraðgerð sem gerir notendum kleift að „stækka“ inn á merkjahluti eins og ventupúlsa frá inntakinu eða innspýtupúlsar frá eldsneytisstönginni.
Til notkunar með PicoScope. Hægt að nota með öðrum scopum og/eða DVOM, en gæti þurft BNC-Banana jack millistykki.
DO263-2 Step 4 Pressure testing with the WPS500X
With the unparalleled resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis of many automotive systems.
Often, problems reported by customers can have many potential causes, and simply reading fault codes leaves you no closer to a solution. In addition to the comprehensive electrical testing provided by PicoScope, the addition of a WPS500X provides you with that same detailed insight into the engine system for accurate diagnosis of common problems such as:
No start
Loss of power
Misfire
Stalling
Engine noise
Emissions fault
Backfire
With the unparalleled resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis on many automotive systems.
Accurately measure up to 500 psi (34 bar)
Ultra-fast 100 µs response time
Zoom function for enhanced analysis capabilities
Internal rechargeable LiPo battery
Integrated pressure relief / bleed-off valve
Auto zeroing
High noise immunity
Temperature compensated
The WPS500X features an extremely fast 100 µs response time from 0% to 90% of full scale and sensitivity down to about 0.07 psi (5 mbar). This provides you with an accurate representation of rapidly changing signals that span a broad pressure range.
Use the WPS500X with PicoScope to reveal how your engine is actually performing with minimal intrusion. Compression, airflow, valve timing and back pressure can all be measured in one hit.
Kit contents
PA094 WPS500X compression adaptor carry case
TA081 USB charging cable for the WPS500X
TA083 Fuel hose for WPS500, large Schrader
TA085 Vacuum hose for WPS500 pressure transducer
TA086 Bleed hose for WPS500 pressure transducer
TA087 Exhaust adaptor for WPS500 pressure transducer
TA117 Fuel hose for WPS500, small Schrader
TA129 Universal vacuum adaptor
TA130 BNC 5m to BNC cable
TA142 Foster 2 series quick coupler female to ¼ NPT male
TA212 Standard compression hose for WPS 500
TA213 Adaptor M10 short reach
TA216 Adaptor M12 deep reach
TA217 Adaptor M14 short reach
TA218 Adaptor M14 deep reach
Reviews
There are no reviews yet.